Handcrafted Wooden Furniture Made in the UK | Learn more

FREE UK DELIVERY! Learn more

How to Install Floating Shelf | Installation Guide

How to Install Your Floating Shelf

Follow this simple step-by-step guide to securely install your MKGT solid wood floating shelf with concealed metal brackets.

What You'll Need

  • Drill
  • Spirit level
  • Pencil
  • Tape measure
  • Suitable wall fixings

Step-by-Step Installation

1 Choose the Shelf Position

Decide where you would like your floating shelf to be installed. Use a tape measure and spirit level to determine the correct height and position.

2 Mark the Fixing Points

Mark the positions of the concealed brackets on the wall using a pencil. Check with a spirit level to make sure both fixing points are perfectly aligned.

3 Drill the Fixing Holes

Drill the marked positions using a drill bit suitable for your wall type. Make sure the holes are straight and deep enough for the supplied wall plugs.

4 Insert the Wall Plugs

Insert the wall plugs fully into the drilled holes. The plugs should sit securely and flush with the wall surface.

5 Install the Concealed Brackets

Screw the concealed metal brackets securely into the prepared fixing points. Make sure both brackets are straight, firmly fixed and correctly aligned.

6 Slide the Shelf onto the Brackets

Align the pre-drilled holes in the back of the shelf with the concealed brackets. Carefully slide the shelf onto the brackets until it sits firmly against the wall.

7 Check the Installation

Check that the shelf sits level and flush against the wall. Make sure the brackets and wall fixings are secure before placing any items on the shelf.

For the Best Floating Finish

Take extra care when marking and drilling the bracket positions. Accurate alignment will help the shelf sit level, close to the wall and give the clean concealed-bracket appearance.

Important Safety Information

Always install into a structurally sound wall using fixings suitable for your wall type. Check for hidden electrical cables and pipes before drilling. For plasterboard walls, suitable cavity fixings must be used. Maximum load depends on wall type, fixing method and correct installation. If you are unsure about your wall construction or installation, consult a qualified installer.

MKGT Floating Shelves

Solid wood floating shelves with concealed brackets for a clean, modern finish. Handcrafted in the UK.

Shop Floating Shelves